USING STABILISER
Always read the safety directions first (refer packaging)
At the beginning of the season distribute stabiliser at the rate of 250g per 10,000 litres of pool water (refer to pool calculator). This will result in a stabiliser level of approximately 30ppm.
To maintain this level when the pool is in use, repeat every three months.
IMPORTANT NOTE: To avoid over dosing you must always check your stabiliser level before adding more product. If the level of stabiliser is too high this will lock up the chlorine making it ineffective and cause symptoms similar to having no chlorine in the pool.
DO NOT use stabilisers if you are chlorinating with Poolpride Stabilised Chlorine Granules or Poolpride Stabilised Chlorine Tablets.
DOWNLOAD MSDS
Stabiliser MSDS
DOWNLOAD INFORMATION SHEETS
Stabiliser INFO
OTHER INFORMATION
For more product information please contact our Customer Support Team.
